Listening To Cds; 3-Cd Changer Continuous Playback - JVC XL-R5010BKC Instructions Manual

Listening to CDs

3-CD Changer Continuous
Playback
Compatible CDs
The 3-CD changer can be used to play back general audio CDs,
CD-R and CD-RW media.
1, 2 3
XL-R5010 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
STANDBY/ON
3
CD -
PHONES LEVEL
PLAY & EXCHANGE
MIN MAX
PLAY MODE CD EDIT CD REC
STOP PLAY PAUSE
PHONES
7 8
3
Example: Loading a CD for playback in tray CD1.
1
Press the CD1 EJECT 0 button to open the tray.
• The power comes on, and tray CD1 opens.
2
Load a CD in position and close the tray by
pressing on the CD1 EJECT 0 button again.
Place the CD with its
label side facing up.
Place an 8-cm CD in the
center cutout.
• "CD (*) READ DISC" flashes in the information display while
the disc is being read.
• Follow steps 1 and 2, repeating the process for CD2 and CD3,
pressing the appropriate EJECT 0 buttons, and load CDs in
trays CD2 and CD3 as well.
• The unit will not respond to commands when a specified tray is
being opened or closed or while the unit is switching CD trays.
• 3-CD changer trays cannot be opened during the recording
operation even if recording is being performed from an external
source. (This is a safety feature that prevents the possible noise
and vibration created by other operations from lowering the
quality of the recording in process.)
MULTI JOG
REC LEVEL
– +
EJECT
REC SOURCE SELECTOR MIX BLANCE
DIGITAL CD LINE MIC
LINE CD
MIC LINE
SYNCHRO MENU SET CANCEL
REC/
FINALIZE STOP PLAY PAUSE REC MUTING
MIC
3
Press the CD1 button.
• The function is set to CD, and CD1 playback starts from track 1.
CD PLAYER 1 2 3 4 5
6 7 8 9
• The track number is cleared from the music calendar when the
corresponding track has finished playing.
• In this example, playback proceeds through all of the tracks on
CD1, CD2 and CD3, and stops automatically after the last track
on CD3 has finished playing. This pattern changes depending
on the first disc selected for play, as described in the following
section.
When one or more CDs are already in the trays.
• Press the button of the CD tray that you want to start playback
from. Continuous play will start playback from the CD in that
tray. If a CD tray button is pressed when the unit is in the
standby mode, continuous play will start from the tray selected
when the power is turned on.
• When play starts from CD2
The CDs are played in the sequence of CD2 = CD3 = CD1,
and then playback stops automatically.
• When play starts from CD3
The CDs are played in the sequence of CD3 = CD1= CD2,
and then playback stops automatically.
If one of the trays does not contain a CD, play skips to the CD
in the next tray in the sequence.
Notes
• The CD1, CD2, and CD3 buttons do not function during pro-
gram and random play modes.
• If a tray is opened and closed when it is not the current tray in
use, the unit temporarily assigns the tray a NO DISC status.
When it becomes time to play the disc in this tray, the disc infor-
mation is read, and if there is no disc, the unit will move on to
the next tray.
• The total track time does not always match total play time (time
shown in display window) exactly because the playback time
includes lead-in and lead-out spaces as well.
Playing CDs using the CD Control PLAY
Press the CD Control PLAY 3 button to select the 3-CD changer
function. This automatically starts playback of the disc in the cur-
rently selected tray.
• The currently selected tray is indicated by the red "
appearing to the immediate right of the CD icon in the display
window.
(To be continued on the next page)
DIGITAL HIGH SPEED AUTO TRACK
44.1 kHz L
–
40 30 20 15 10 6 3 0 dB
R
3
button
PLAY
" mark
11