Table of Contents
Advertisement
SYSTEM CO N N ECTIO N S
Connection To
A Sa tellite
Tuner
Simple Connections
This is an example of simple connection if you don't
have a decoder.
Connect the satellite tuner to the video recorder's AV2 IN/
DECODER connector, then connect the recorder's AV1 IN/OUT
connector to the TV's 21-pin SCART connector.
Satellite Tuner U nit
DECODER
Mains outlet
Back of Recorder
IM PO RTAN T
When you set "AV2 SELECT" to "SAT" (
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/ VCR on the remote control to turn off the VCR indicator on the display panel.
● In this case, be sure to set the
Downloaded from:
https://www.usersmanualguide.com/
Outdoor Unit
Satellite Cable
VCR
TV
AV1 OUT switch
S OUT
S IN
AV1 OUT
COMP. Y/C
(S-1)
AV1 IN/OUT
AV2 IN/DECODER
DV IN
pg. 54), it is possible to view a satellite broadcast with the TV set to its AV mode even
AV1 O U T switch on the rear panel to COMP .
N O TES:
● Set "AV2 SELECT" to "AV2" or "SAT". (
● You can use Automatic Satellite Program Recording function
(
pg. 37) with this connection.
● To record a programme via the satellite tuner, select L-2 mode
by pressing N U M BER keys and/or TV PRO G so that "L-2"
appears on the display panel.
● If both the satellite tuner and the TV have S-VIDEO connec-
tors, you can enjoy high-quality S-VHS pictures. Connect
your recorder and the TV via S-VIDEO connection (
then connect the satellite tuner's S-VIDEO and AUDIO output
connectors to the recorder's S IN and AUDIO IN connectors
on the rear panel. Select S-1 mode by pressing N U M BER keys
and/or TV PRO G , so that "S-1" appears on the display panel.
● For details, refer to the instruction manual for the satellite
tuner.
Aerial
Aerial connector
TV Aerial
cable
ANT. IN
RF OUT
21-pin AV input
connector (SCART)
SYNCHRO EDIT
JLIP
R.PAUSE
L
(L-1)
ANT. IN
AUDIO
R
OUT
IN
(S-1)
(L-2)
ANT. OUT
57
EN
pg. 54)
pg. 5),
Back of TV
Advertisement
Table of Contents
