Bypassing The Fs Converter (Sampling Frequency Converter*) For More Efficient Digital Recording - JVC XL-R5010BKC Instructions Manual

5
Press the SET button again to confirm the
operation.
• "UNFINALIZE" is shown in the information display as the
unfinalizing procedure is performed. The procedure takes a lit-
tle over a minute, and the level meter is used to indicate approx-
imately how much time is remaining until unfinalization is
complete. Upon completion, the normal display is shown.
Bypassing the FS Converter
(Sampling Frequency
Converter*) for More Efficient
Digital Recording
* known as Sampling Rate Converter.
The FS converter of this unit performs the conversion of digital sig-
nals from sources that use sampling frequencies other than
44.1kHz to the sampling frequency of 44.1kHz, which is necessary
for recording the signals to a CD-R or CD-RW disc.
• When the FS converter is turned off, the converter is bypassed if
the digital signal of the source has a sampling frequency of
44.1kHz and when analog and multiple input recording are per-
formed.
• If source sampling frequencies of 32kHz or 48kHz are detected,
the FS converter is activated automatically and the signal is
routed through it.
• When the FS converter is turned on, all signals to be recorded
are routed through it regardless of the sampling frequency, even
the 44.1kHz digital signal is passed through it as the converter
works as a filter to reduce signal fluctuation in the disc record-
ing. For this reason, having the function set to "ON" is recom-
mended for most recording purposes.
• When recording specially encoded discs such as dts
*2
HDCD , etc., be sure to turn the converter off (setting to
"OFF") using the following procedure (see Step 4).
*1
dts is trademark of Digital Theater Systems, Inc.

*2
HDCD is a registered trademark of Pacific Microsonic, Inc.
Note
• When recording from the 3-CD changer, the sampling rate con-
verter is always turned off.
36
STANDBY
STANDBY/ON
PHONES LEVEL
MIN MAX
PLAY MODE CD EDIT CD REC
STOP PLAY PAUSE
PHONES
2,4
3,5
1
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
2
Turn the MULTI JOG control on the main unit or
2 3
press the /
control until "CONVERTER" is shown in the
information display.
*1
,
3
Press the SET button (main unit/remote
control).
• The "CONVERTER ON" is shown and "ON" flashes in the
information display. (The default setting is "ON".)
• Press the CANCEL button (main unit/remote control) if you do
not wish to perform this procedure.
4
Turn the MULTI JOG control on the main unit or
2 3
press the /
control to select "ON" or "OFF".
• Press the CANCEL button (main unit/remote control) if you do
not want to perform this procedure. The setting is not changed.
5
Press the SET button (main unit/remote
control).
Notes
• Pressing the SYNCHRO button when unlocked displays
"UNLOCK" in the information window and releases the syn-
chronized condition.
EJECT
REC SOURCE SELECTOR
3 DIGITAL CD LINE MIC
- CD
PLAY & EXCHANGE
SYNCHRO MENU SET CANCEL
REC/
FINALIZE STOP PLAY PAUSE REC MUTING
1 3,5
STANDBY/ON
CD1 CD2 CD3
CD REC CD EDIT FINALIZE DISPLAY
1 2 3
4 5 6
7 8 9
+10
10
PLAY C O N T R O L
MODE REPEAT CD CDR
•
REC FADE SYNCHRO
REC MUTING
1
+
PITCH
SET
PITCH– CANCEL
RM–SXLR5010A
REMOTE CONTROL
(menu) button on the remote
(menu) button on the remote
2,4
MULTI JOG
REC LEVEL
–
+
MIX BLANCE
LINE CD
MIC LINE
MIC
CANCEL