Setting Up Synchronized Start Recording For External Digital; Source (Cd, Md, And Dat Only); Resetting The Unit To The Factory Default Settings - JVC XL-R5010BKC Instructions Manual

Setting Up Synchronized Start
Recording for External Digital
Sources (CD, MD, and DAT only)
When performing digital synchronized start recording of an exter-
nally connected digital source, synchronized start recording begins
when a digital signal is encountered in the record pause mode.
However, if the recording source is connected to the DIGITAL IN
(DIGITAL IN OPTICAL) terminal, it is also possible to set this unit
to start and stop recording when you are recording a single track.
STANDBY
STANDBY/ON
3 - CD
PHONES LEVEL
PLAY & EXCHANGE
MIN MAX
PLAY MODE CD EDIT CD REC
STOP PLAY PAUSE
PHONES
CD1 CD2
CD REC CD EDIT
1 2
4 5
7 8
10 +10
PLAY
MODE REPEAT
•
REC
REC MUTING
2,4
PITCH
SET
3,5 PITCH–
RM–SXLR5010A
1
When the unit is in stop mode, press the MENU
button.
2
Turn the MULTI JOG on the main unit or press
the 2 2 2 2 / 3 3 3 3 button on the remote control until "D-
IN SYNCHRO" appears in the display.
3
Press the SET button.
• The current setting appears in the display.
4
Turn the MULTI JOG on the main unit or press
the 2 2 2 2 / 3 3 3 3 button on the remote control to select
"START" or "START&STOP".
• When "START" is selected, only the start of the digital signal is
recorded synchronously.
• When "START&STOP" is selected, both the start and stop of
single track recroding are controlled by information in the
source digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
• Please note that the type of synchronized recording being per-
formed as set in the above procedure is not indicated in the display
during actual recording. Even when recording is started, only the
"SYNCHRO" indicator remains lit until recording is stopped.
• Even if this setting is set to "START&STOP", recording is con-
cluded automatically if the source is stopped, the disc is
changed, or if a track search is performed.
2,4
MULTI JOG
REC LEVEL
– +
EJECT
DIGITAL CD LINE MIC REC SOURCE SELECTOR MIX BLANCE
LINE CD
MIC LINE
SYNCHRO MENU SET CANCEL
REC/
FINALIZE STOP PLAY PAUSE REC MUTING
MIC
1 3,5
CANCEL
STANDBY/ON
CD3
FINALIZE DISPLAY
3
6
9
C O N T R O L
CD CDR
FADE SYNCHRO
1
+
CANCEL
REMOTE CONTROL
Note
• Pressing the SNCHRO button when unlocked displays
"UNLOCK" in the information window and releases the syn-
chronized condition.
Resetting the Unit to the
Factory Default Settings
By performing the following procedure, all menu settings stored in
the unit are cleared and the unit is reset to the factory default settings.
STANDBY
STANDBY/ON
3 CD
-
PHONES LEVEL
PLAY & EXCHANGE
MIN MAX
PLAY MODE CD EDIT CD REC
STOP PLAY PAUSE
PHONES
CD1 CD2
CD REC CD EDIT
1
4
7
+10
10
PLAY
MODE REPEAT
•
REC
REC MUTING
2
PITCH
SET
3,4
PITCH–
RM–SXLR5010A
1
When the unit is in stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG control on the main unit or
2 3
press the / (menu) button on the remote
control until "SET DEFAULT" is shown in the
information display.
3
Press the SET button (main unit/remote control).
• "SET DEFAULT?" is shown in the information display.
• Press the CANCEL button (main unit/remote control) if you do
not want to perform this procedure.
4
Press the SET button (main unit/remote control).
• The unit is reset to the factory default settings and returns to the
stop mode.
DUB- SPEED HIGH (CD- R:4x,CD- RW:2x)
FINALIZE ON
AUTO TRACK ON
TRACK SPACE ON
CONVERTER ON
D- IN SYNCHRO START
2
MULTI JOG
REC LEVEL
– +
EJECT
DIGITAL CD LINE MIC REC SOURCE SELECTOR MIX BLANCE
LINE CD
MIC LINE
SYNCHRO MENU SET CANCEL
REC/
FINALIZE STOP PLAY PAUSE REC MUTING
MIC
1 3,4 CANCEL
STANDBY/ON
CD3
FINALIZE DISPLAY
2 3
5 6
8 9
C O N T R O L
CD CDR
FADE SYNCHRO
1
+
CANCEL
REMOTE CONTROL
At the time of purchase
37