Connections; Analog Connections - JVC XL-R5000BK Instructions Manual

Connections

Do not turn on the power until all the connections have been completed.

Analog Connections

Use the accessory pin cables to connect this unit's LINE connectors with the TAPE/CDR connectors on the receiver, etc.
Recording signals
(line input)
Accessory pin cables
Playback signals
DIGITAL IN
OPTICAL
DIGITAL OUT
OPTICAL
LINE
( )
IN REC ( ) OUT PLAY
LEFT LEFT
RIGHT RIGHT
Units have a voltage selector excluding units for
Canada, Europe, and U.S.A.
Note
• Before selecting the COMPU LINK-4 mode (CDR or TD), dis-
connect the power cord from the power outlet to turn off the
power. The function will not be set if it is selected while the
power is on.
Alternatively, when the COMPU LINK-4 mode (CDR or TD) is
selected while the power is on, disconnect the power cord and
then re-connect it.
• Misconnections can be avoided by using the white plugs on the
accessory pin cables for the LEFT channel and the red plugs for
the RIGHT channel.
• Insert the plugs all the way in. Incomplete connections may
cause noise.
• When plugging the power cord into the AC outlet, be sure to
match the width of the plug blades with the outlet.
3
TAPE
/CDR
Amplifier, receiver etc.
made by JVC
OUT
IN
(REC) (PLAY)
Accessory connecting cable
(with black plugs)
VOLTAGE SELECTOR
COMPU LINK - 4
(SYNCHRO)
MODE Power cord
CDR TD
Selecting the MODE switch position
MODE switch
• When connected with
CDR input/output
terminals of the amplifier
or receiver
MODE
CDR
• For further details on the COMPU LINK function, see
page 37.
Optional connecting cable
XL-R5000 CD/CDR MULTIPLE
COMPACT DISC RECORDER
• When connected with
TAPE input/output
terminals of the amplifier
or receiver
MODE
TD CDR
COMPU LINK - 3
SYNCHRO
CD player, cassette deck or
other component made by JVC
COMPU LINK - 4
SYNCHRO
TD