Connections - JVC XR-D400SLE Instructions Manual

Connections (for audio use)
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the
instructions supplied with the component you wish to connect.
The unit
LINE SCSI
OUT
ID I / O TERMINATION
L
ON
R
For the SCSI connection,
see page 24.
• Be sure to make connections correctly between corresponding terminals.
To connect the AC power cord
When all the connections have been made, insert the power plug into the wall
outlet firmly.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and
cause fire, electric shock, or other accidents.
Caution
• Do not damage, remodel, twist, or pull the power cord, as this may cause fire, electric
shock, or other accidents.
• Contact a dealer and get a new power cord if the cord is damaged. A damaged cord
may cause fire, electric shock, or other accidents.
• Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric
shock, or other accidents.
AC power cord
(supplied)
~ AC IN
OFF
Amplifier/receiver
Audio cable (supplied)
Getting started
To AC outlet
RIGHT
AUDIO
LEFT
English
9