Table of Contents
Advertisement
Pressure Adjusting Lever
The pressure adjusting lever should be set at ´´3 ´´ for regular sewing.
Reduce the pressure to ´´2 ´´ for applique, cut work, drawn work, basting
and embroidery.
Set the pressure to ´´1´´ when sewing chiffon, lace, organdy and other
fine fabrics. Velours and knits with a lot of stretch may also require a
´´1´´ setting.
To Snap On and Snap Off the Presser Foot
To snap off
Turn the balance wheel toward you to raise the
needle to its highest position.
Raise the presser foot.
Press the red button on the back of the foot holder.
The presser foot will drop off.
6
Open face plate
Pressure adjusting lever
3(Ordinary sewing)
To snap on
When attaching the presser foot, the pressure
adjusting lever should always be at position ´´3 ´´.
Place the presser foot so the pin on the foot lies
just under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
Dropping the Feed Dogs
Drop feed lever is located underneath of free arm bed.
* Feed dogs must
always be up for normal
sewing.
To raise the feed
dogs,push the lever to
the direction of arrow
as illustrated.
For dropping the feed
dogs, push the lever
to the direction of
arrow as illustrated.
Hide quick links:
Advertisement
Table of Contents
