Table of Contents
Advertisement
Low
high
Controlling Sewing Speed
Speed Setting Lever
★ ★ ★ ★ ★
The maximum sewing speed can be controlled
by the speed setting lever.
To increase the speed, slide the lever to the
right (toward
).
To decrease the speed, slide the lever to the
left (toward
).
Up/Down Needle Position Button
Pres this button to bring the needle up or down.
If the needle is up, it will go down to the lowest position by pressing this button.
If the needle is down, it will go up to the highedt position by pressing this button.
Use this button when:
- picking up the bobbin thread (see page 12).
- lowering the needle into the fabric to turn a square corner (see page 15).
Foot Control
★ ★ ★ ★ ★
Sewing speed can be varied by the foot
control.
The harder you press on the control, the
faster the machine runs.
Face plate
Bulb
Lamp socket
Sewing Light
The sewing light is located behind the face plate.
To replace the bulb
Caution: Turn off the power switch and disconnect the
power supplu plug before replacing the bulb.
The bulb could be HOT, wait until it has cooled down
before handling it.
Open the face plate. Pull the bulb out from the lamp
socket. Insert a new bulb into the socket, aligning the
pins with the holes in the socket.
5
Hide quick links:
Advertisement
Table of Contents
