Zipper Appiication - John Lewis JL 300 Manual

Machine Setting

Zipper AppIication

Attach the zipper foot with the pin on the right hand
side.
Lower the zipper foot on the top side at the bottom
of the zipper so that the needle pierces the fold and
the zipper tape.
Groove
Pin
To Attach the Zippar Foot:
* Fit the pin on the zipper foot into the
groove on the foot holder.
* To sew the right side of the zipper,
attach the zipper foot on the left hand
side.
Slider
Sew through the fold and zipper tape.
Stop just before the zipper foot reaches the slider on
the zipper tape.
Lower the needle slightly into the fabric.
Raise the zipper foot and open the zipper. Lower the
foot and stitch the remainder of the seam.
End of opening
Top side of
fabrics
Prepare your fabric.
1. Put the top sides of the fabric
together and sew to the end of
the zipper opening.
Use the reverse button to lock
the stitches.
2. Set the stitch length at ´´4´´
and sew the zipper opening.
Outer fabric (rear)
Close the zipper and spread the fabric flat with the
right side facing up.
Wrong side
0.2 to 0.3 cm
of fabric
(1/8´´)
To Sew :
Fold back the left seam allowance.
Turn under the right seam allow-
ance to form a 0.2 to 0.3 cm (1/8´´)
fold.
Place the zipper teeth next to 0.2
to 0.3 cm (1/8´´) fold and pin in
place.
Basting stitch
Slider
Zipper tape
23