Rolled Hem - John Lewis JL 300 Manual

Machine Setting
Lower the hemmer foot, then sew by
lifting up the edge of the fabric to

Rolled Hem

Make a double 0.25 cm (1/8´´) fold
approximately 8 cm (3´´) in length.
0.7 cm (1/4´´)
0.7 cm (1/4´´)
Trim about 0.7 cm (1/4´´) from corners
as illustrated, to reduce bulk.
Lower the needle into the fabric at the
point where sewing is to begin, then
lower the hemmer foot.
Sew 3 or 4 stitches while holding the
needIe and bobbin threads.
Lower the needle into the fabric and
lift the hemmer foot. Insert the folded
portion of the fabric into the curl of the
hemmer foot.
25