Threading The Machine; To Use Needle Threader - John Lewis JL 300 Manual

Threading the Machine

q
e
w
Raise take-up lever to its highest
r
position by turning balance wheel
toward you.
t
Raise the presser foot with the
presser foot lifter and pass the
thread in the order from

To Use Needle Threader

w
q
Raise the needle to its
highest position.
Lower the needle threader
A as far as it will go.
q
q t
to .
Turn the knob A in the direction of the
arrow in the illustration, the hook B will
come out through the needle eye.
Lead the thread around the guide C
and under the hook B .
q w
w
Lead the thread from the
spool and pass it through
the thread guide. Then
draw it down along the
right slot.
e
Turn the knob A in the
direction of the arrow in
the illustration, then
draw the thread loop to
the back of the needle.
e
e
Firmly draw the
Guide the thread
thread from the
around the bottom
right to the left over
of the thread guide
the take-up lever
plate from right to
and down into the
left, then draw it
take-up lever eye.
upward.
Then guide it down
along the left slot.
r
Raise the needle
threader knob A slowly to
draw the thread loop up.
r t
r
Slide the
thread from
the left behind
the needle bar
thread guide.
t
Thread the
needle from
front to back.
t
Pass the end of the
thread through the
needle eye by pulling
the thread loop to the
back.
11