Blind Stitch Hemming - John Lewis JL 300 Manual

Machine Setting

Blind Stitch Hemming

On lightweight fabrics the raw edge can be turned under and pressed.
On heavy weight fabrics that ravel, the raw edge should be overcast first.
Fold up the hem the desired amount and pin in place.
Then fold the hem under the fabric as illustrated.
26
Position the fabric on the machine so
that the needle just pierces the folded
part of the fabric when the needle
comes over to the extreme left side.
Lower the presser foot.
Turn the guide screw and move the
sliding guide next to the folded edge.
Sew guiding the folded edge along the
sliding guide.