Grandstream Networks GXV34 0 Series Manual page 56

Enter the IPv6 prefix length in "Statically configured" IPv6 address type.
IPv6 Prefix
Length
Default is 64.
DNS Server 1 The DNS Server 1 when static IP is used.
DNS Server 2 Configures the secondary DNS IP address.
Layer 2 QoS
When
802.1Q/VLAN Tag
VoIP traffic. Assigns the VLAN Tag of the Layer 2 QoS packets for Ethernet for VoIP Calls. The Default
(Ethernet) for
value is 0.
VoIP Calls
Layer 2 QoS
When
802.1p Priority
VoIP traffic. Assigns the priority value of the Layer 2 QoS packets for Ethernet for VoIP Calls. The
Value (Ethernet)
Default value is 0.
for VoIP Calls
802.1x Mode
Enables and selects the 802.1x mode for the phone system. The supported 802.1x modes are:
MD5, EAP-TLS, EAP-PEAP
802.1x mode
The default setting is "Disable".
Enters the identity information for the selected 802.1x mode. (This setting will be displayed only if
802.1x Identity
802.1 X mode is enabled).
Enters the secret for the 802.1x mode. This option will appear when 802.1x mode is EAP-MD5 or EAP-
802.1x Secret
PEAP.
802.1X CA Uploads the CA Certificate file to the phone. (This setting will be displayed only if the 802.1 X mode is
Certificate enabled)
802.1X User Loads the Client Certificate file to the phone. (This setting will be displayed only if the 802.1 X TLS
Certificate mode is enabled)
Network Settings/Wi-Fi Settings
Wi-Fi Basics
Enables/disables the Wi-Fi feature.
Wi-Fi Function
The default setting is "Disable".
Sets the type of Wi-Fi Band (2.4G & 5G, 2.4G or 5G).
Wi-Fi Band
The default setting is 2.4G&5G.
Allows to scan and select the available Wi-Fi networks within the range if the Wi-Fi feature is enabled.
ESSID
Click on "Select" to select the Wi-Fi network to connect to. The ESSID will be auto filled in the ESSID filed.
Add Network
Determines the ESSID of the selected Wi-Fi network. It can be auto filled by clicking the select button on
ESSID
the web page.
Security Mode
for Hidden
Defines the security mode used for the wireless network when the SSID is hidden. Default is "None".
SSID
Password Determines the password for the selected Wi-Fi network.
Advanced
Settings
Configure Wi-Fi country code. The default value is "United States of America".
Country Code
Note: Reboot is required to take effect.
Different Networks for Data and VoIP Calls set to Yes, then this option will be applied for
Different Networks for Data and VoIP Calls set to Yes, then this option will be applied for
Table 31: Network Settings/Ethernet Settings
EAP-