Grandstream Networks GXV34 0 Series Manual page 47

It is used to set to categorize accounts in server mode groups, the accounts in the same group will be
combined as one and the account widget will display the Caller ID in the account with lowest ID. The phone
can answer any incoming calls to each account in groups.
Virtual
If user makes an outbound call, the phone system will use the lowest ID account by default. If the account
Account
fails or SIP INVITE message is timeout, the phone system will failover to the next account in the group with
Group
higher account ID.
If all the accounts are not available in the group, the phone system will traverse all the accounts in the
group and notify the end users the session is failed.
Allows users to synchronize XML phonebook upon receiving SIP NOTIFY message with header
Allow Sync contacts
Phonebook Note: Received SIP NOTIFY will be first challenged for authentication purpose before contacting configured
via SIP server to download XML phonebook. The parameters used are the ones configured at [Download Contacts].
Notify The authentication can be done either using admin credentials (if no SIP account is configured) or using SIP
account credentials. Default is "Yes".
Account/SIP/Special Features
Configures phone's settings to meet different vendors' server requirements.
Special Features
Users can choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS, Mobotix, ZTE NGN, or Huawei
IMS depending on the server type.
This feature is used for BroadSoft / Metaswitch call feature synchronization. When it's set to BroadSoft
/ Metaswitch, DND and Call Forward features can be synchronized with BroadSoft / Metaswitch server.
The call forward function will take effect on the server side while the local call forward function is not
Feature Key
effective.
Synchronization
The default setting is "Disable".
Configures whether to send SUBSRCIRBE message to BroadSoft server to obtain Call Park notifications.
Enable BroadSoft
Call Park
The default setting is "No".
Configures the network-based conference URI (the BroadSoft Standard). If it is configured, end user
Conference URI
needs to tap the N-way key during the conference to transfer the host to the remote media server.
Broadsoft Call When enabled, Feature Key Synchronization will be enabled regardless of web settings. Default is
Center Disabled.
Hoteling Event Enables BroadSoft Hoteling Event feature. Default is Disabled.
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call center status. Default is
Call Center Status
Disabled.
Table 24: Account/SIP/Advanced Settings
Call Settings
SCA
Event: sync-