Grandstream Networks GXV34 0 Series Manual page 52

Configures recording mode.
Record Mode
Enable Auto Record
Configures whether to auto record when a call is established. If set to "Yes", the call recording will start
When Call
automatically when the call is established.
Established
Enable/Disable rejected call notification. Once enabled, a missed call will prompt on LCD when reject
Rejected Call
the incoming call.
Notification
Default is "No".
Return Code When
When rejecting an incoming call, the phone will send the selected type of SIP response for the call.
Rejecting Incoming
Calls
Return Code When
When DND is enabled, the phone will send the selected type of SIP response
DND Is Enabled
Group Listen with Configures whether to enable speaker audio output when in a call with handset/headset. If enabled,
Speaker the speaker audio output is enabled, but you cannot talk through the speaker.
Users can configure and customize the call functions in the call interface during a normal call. The
available call functions are: Mute, Hold, Video, Record, Transfer, Call Details, New Call, Keyboard,
One-Way Call
Media Channel, Conference.
Function Buttons
Note: Users can choose only 3 of these functions to be shown on the call interface during a one-way call.
Users can configure and customize the call functions in the call interface during a conference. The
available call functions are: Invite, Mute, Hold, Record, Call Details, New Call, Keyboard, Media
Conference Call
Channel.
Function Buttons
Note: Users can choose only 3 of these functions to be shown on the call interface during a conference.
Call Function Button Configures the timeout period for call function buttons display. If set to "0", the buttons will be always
Display Timeout (s) displayed. The value range is 0-30 seconds.
Phone Settings/Ringtone
Auto Config CPT by
Region
● If set to (Default) "Record locally", the phone will use the local recorder for call recording, and the
audio file will be saved according to the recorder setup.
● If set to "Record on PortaOne", the phone will send the specified SIP messages to the
corresponding server;
● If set to "Record on UCM", the phone will send the recording feature code to the UCM server to
request for recording, and the recording function will be executed by the server.
● If set to "SD card", the phone will use the SD card for call recording.
● Set "Disabled" to ignore this feature
Table 27: Phone Settings/Call Settings
Configures whether to choose Call Progress Tone automatically by region. If set to "Yes", the
phone will configure CPT (Call Progress Tone) according to different regions automatically. If set
to "No", you can manual configure CPT parameters.
The default setting is "No".