Grandstream Networks GXV34 0 Series Manual page 74

Key Mode
Account
Display Name
User ID
DTMF Content
Address
Conference Name
Mute all members
Configure
Programmable Key
General Settings
General Settings
Enable LCD Turn On
Automatically when
BLF/SCA status changes
Proxy Prefix
Account
BLF Call-pick Prefix
The key modes are:
Speed Dial: Press to dial the UserID when the accounts being configured as VPK.
Busy Lamp Field: Monitor the UserID status when the accounts being configured as VPK.
Call Forward : Transfer the current active call to UserID when the accounts being
configured as VPK.
Call Intercom: Intercom/paging to the UserID when the accounts being configured as
VPK.
Speed Dial via Active Account: Similar to Speed Dial but it will dial based on the current
active account. For example, if the phone is offhook and account 2 is active, it will call the
UserID when the accounts being configured as VPK.
Dial DTMF: Dial the DTMF digits of the UserID when the accounts being configured as
VPK during the call.
Call Park: Configure the call park feature code to park or retrieve the call.
Multicast Paging: For multicast sending, please fill in the display name in the Settings and
fill in the sending address in the multicast address.
Speed Conference: Quickly dial up multiple numbers to set up a meeting.
Dial Prefix: After configured, once pressed this key, all numbers use this account will
automatically add the prefix promptly
Configures the SIP account when the accounts being configured as VPK.
Configures the display name when the accounts being configured as VPK.
Configures the UserID for the corresponding VPK mode when the accounts being configured
as VPK.
When key mode is set to Dial DTMF it Configures the dialed DTMF content.
When key mode is set to Multicast Paging, it configures the multiple broadcast address.
When key mode is set to Speed Conference, it sets the speed conference name.
When key mode is set to Speed Conference, enables/disables mute all meeting members.
When key mode is set to Speed Conference, it configures Speed Conference members list:
Number: Enter member's number.
Name: Enters member's name.
Account: Specified the account associated.
Operation: + to add a member, – to delete a member.
Configures whether the LCD should turn on automatically when BLF/SCA status changes.
Displays account name if configured, otherwise, displays "Account X" where X is the account
number.
Configures the prefix prepended to the BLF extension if the phone answers a call to the
monitored party by the BLF key.
Default setting is ** for each account.