Grandstream Networks GXV34 0 Series Manual page 22

Status
Account Status
This page displays all the available accounts on the phones with their respective status (Registered/Unregistered and
Activated/Inactivated).
Network Status
This page displays Network status including IPv4/v6 address, subnet mask, gateway, DNS server...
System Info
This page shows system info including RAM Available Memory, Android Version, System Version, Hardware version ...
Storage Status
This page shows device storage status (Storage used and available Storage).
Network
Users can configure Ethernet settings, Wi-Fi, VPN, PPPoE and other advanced network settings here.
Ethernet Settings
IP Mode: Selects which Internet protocol to use. When both IPv4 and IPv6 are enabled, phone attempts to use preferred
protocol first and switches to the other choice if it fails.
IPv4 Settings: Here user can configure the IPv4 address Type. If DHCP is selected, the phone will get an IP address
automatically from the DHCP server in the network. This is the default mode. If Static IP is selected, manually enter the
information for IP Address, Subnet Mask, Default Gateway, DNS Server and Alternative DNS server. If PPPoE is selected,
type PPPoE Account ID and PPPoE Password provided from the PPPoE server to get authenticated for network access.
IPv6 Settings: Here user can configure the IPv6 address Type. If Auto-configured is selected, the phone will get an IP
address automatically from the DHCP server in the network. This is the default mode. If Static IP is selected, manually
enter the information for IP Address, Prefix Length, DNS Server and Alternative DNS server.
Figure 22: GXV3450 System Settings