Grandstream Networks GXV34 0 Series Manual page 35

Configures the time period (in seconds) in which the phone will retry the registration process in the event
Registration
that is failed. The default setting is 20.
Retry Wait
The maximum value is 3600 (1 hour).
Time (s)
Configure if the SIP account needs to add Auth header in RE-REGISTER.
Add Auth
If the option is checked, device will always add authentication header in REGISTER.
Header On
If the option is unchecked, device will only send authentication for the first REGISTER.
RE-register
Enable SIP Enables SIP OPTIONS to track account registration status so the phone will send periodic OPTIONS message
OPTIONS to server to track the connection status with the server.
Keep Alive The default setting is "No".
SIP
Configures the time interval when the phone sends OPTIONS message to SIP server. The default setting is
OPTIONS
30 seconds, which means the phone will send an OPTIONS message to the server every 30 seconds.
Keep Alive
The default range is 1-64800.
Interval (s)
SIP Configures the maximum times of sending OPTIONS message consistently from the phone to server. Phone
OPTIONS will keep sending OPTIONS messages until it receives response from SIP server. The default setting is "3",
Keep Alive which means when the phone sends OPTIONS message for 3 times, and SIP server does not respond this
Maximum message, the phone will send RE-REGISTER message to register again.
Tries The valid range is 3-10.
Configures the phone system to subscribe voice message service. If it is set to "Yes", the phone system will
Subscribe periodically send SIP SUBSCRIBE message for Message Waiting Indication service. GXV3480 phone system
for MWI supports both synchronized and non-synchronized MWI.
The default setting is "No".
Determines if the Privacy header will be presented in the SIP INVITE message and if it includes the caller info
Use Privacy in this header. If it is set to "Default", the Privacy Header will be omitted in INVITE when "Huawei IMS"
special feature is active. If set to "Yes", it will always be presented. If set to "No", it will always be omitted.
Header
The default setting is "Default".
Specifies if the P-Preferred-Identity Header will be presented in the SIP INVITE message. If set to "default",
Use P-
the P-Preferred-Identity Header will be omitted in SIP INVITE message when "Huawei IMS" special feature is
Preferred-
active. If set to "Yes", the P-Preferred-Identity Header will always be presented. If set to "No", it will be
Identity
omitted.
Header
The default setting is "Default".
Use P-
Enables/disables the use of P-Access-Network-Info header in SIP request. When disabled, the SIP message
Access-
sent from the phone will not include the selected header.
Network-
Default setting is "No".
Info Header
Use P- Enables/disables the use of P-Emergency-Info header in SIP request. When disabled, the SIP message sent
Emergency- from the phone will not include the selected header.
Info Header Default setting is "No".
If Yes, the SIP message for register or unregister will contains MAC address in the header, and all the
Use Mac
outgoing SIP message including REGISTER will attach the MAC address to the User-Agent header;
Header
If No, neither will the MAC header be included in the register or unregister message nor the MAC
address be attached to the User-Agent header for any outgoing SIP message.
Configures whether to add MAC address in User-agent header. If set to "No", all outgoing SIP messages will
not attach MAC address to the User-agent header. If set to "Yes except REGISTER", all outgoing SIP
messages except REGISTER message will attach the MAC address to the User-agent header. If set to "Yes to
Add MAC in
All SIP", all outgoing SIP messages including REGISTER message will attach MAC address to the User-agent
User-Agent
header.
Determines which network protocol will be used to transport the SIP message. It can be selected from
SIP
TCP/UDP/TLS.
Transport Default setting is "UDP".
Determines the local SIP port used to listen and transmit. The default setting is 5060 for Account 1, 5062 for
Local SIP
Account 2, 5064 for Account 3, 5066 for Account 4, 5068 for Account 5, and 5070 for Account 6.
Port
The valid range is from 5 to 65535.