Zoom Brush Position Check/Adjustment And Pattern Check - Sony SAL24105 Service Manual

Lens for dslr camera

Hide thumbs Also See for SAL24105:

Table of Contents

4-9.

ZOOM BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK

4-9-1. Zoom Brush Position Adjustment (Search Zoom Adjustment Point)

Equipment

• Personal Computer (PC)

• Finished Inspection JIG (AC100 V only)

• Lens Adjustment Program

Note: Lens Adjustment Program is downloadable from the ESI homepage.

1. Preparations

1) Remove the zoom rubber ring.

Zoom Rubber Ring

Fig.4-9-1

2) Peel off the polyester tape (black) 10 mm and remove the zoom ring reinforcement plate and brush cover.

Zoom Ring Reinforcement Plate

Brush Cover

Polyester Tape (Black) 10mm

(8x25 mm)

3) Connected to equipment with checking lens. (Refer to Section 4-1-3.)

4) Start up of "ActuatorChecker.exe".

[Set up]

5) Click

, and perform the initial setting. (Refer to Section 4-1-4.)

SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)

Zoom Ring

Polyester Tape (Black) 10mm

(8x25 mm)

Fig.4-9-2

4-30

Table of Contents