Sony SAL24105 Service Manual page 44

Ver 1.1 2006.12
HELP46
Adhesive bond (B-10): J-6082-612-A
1. Install the 4 group lens block to the focus cam tube block.
2. Tighten the 4th lens hold washer shown in figure.
3. Apply the adhesive bond (B-10) to the 2 locations of all circumference of 4 group lens block and 4th lens hold washer.
Apply the adhesive bond (B-10)
(2 locations of all circumference, width 5mm)
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
4th Lens Holder Block
4 Group Lens Block
Apply the adhesive bond (B-10)
(2 locations of all circumference, width 5mm)
HELP