Sony SAL24105 Service Manual page 90

[Search Focus Adj Point]
3) Click the
4) The message "If Focus-Adjustment-Point is found, Buzzer sounds". is displayed on the pop-up window.
Search the position where the sound beeps by turning the lens to the infinity position.
5) At the position where the sound beeps, tighten two screws loosened, apply the adhesive bond (B-10) to the screws.
6) Perform "4-10-2. Focus Brush Position Check" and "4-10-3. Focus Brush Pattern Check"
3. In case of error display in the Search Focus Adjustment Point
1) When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and
perform "2. Adjusting Method"again.
2) If the "NG" appears again, thought cause communication error of the finished inspection JIG and checking lens, confirm or perform
the following.
• Improper connection of connector.
• Improper of BL contact.
• Disconnection of mirror box fixture.
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
.
Fig.4-10-3
Fig.4-10-4
Fig.4-10-5
Fig.4-10-6
4-39