Sony SAL24105 Service Manual page 42

HELP44
Adhesive bond (B-10): J-6082-612-A
1. Affix the flexible substrate set tape and insulating tape to the locations shown in the figure of main frame flexible PC board block.
2. Fold the main frame flexible board block as instructed.
Fold downward
Fold downward
Fold downward
Fold upward
Flexible Substrate
Set Tape F
(5x10.5mm)
Insulating Tape
(11x15mm)
3. Affix the flexible substrate set tape A, flexible substrate set tape B, flexible substrate set tape C and flexible substrate set tape D to the
locations shown in the figure of bearing press fitting block.
Flexible Substrate Set Tape D
(6.2x10mm)
Bearing Press Fitting Block
4. Affix the main flexible PC board block to the bearing press fitting block, threading the DV encoder block of main flexible PC board
block in the hole of bearing press fitting block. When affixing, use "a" and "b" as references.
Affix the DV encoder block in parallel with the edge surface of bearing press fitting block.
Main Flexible PC Board Block
Bearing Press Fitting Block
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
Fold downward
Main Flexible PC Board Block
Flexible Substrate
Set Tape E
Flexible Substrate
(7.5x14mm)
Set Tape G
(6.5x7.5mm)
Flexible Substrate Set Tape C
Flexible Substrate Set Tape A
Flexible Substrate Set Tape B
a
Zoom Encoder
b
DV Encoder
Hole
Fold downward
Fold upward
HELP