4-6.
FOCUS SCALE PLATE, POSITION ADJUSTMENT
Note:
• The focus-shift adjustment/flange back adjustment should be completed.
• Before focus brush ring position adjustment, be sure to perform the position adjusemtnt of distance scale plate.
1. Adjustment
1) Set the focus ring tube to the infinite end.
2) Align the white line on the focus scale plate with the marking-off line on the fixed holding tube block.
3) Return a little the focus ring, and apply the adhesive bond (B-10) to the location shown in the figure.
Focus Scale Plate
Fixed Holding Tube Block
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
White Line
Marking-off Line
Apply the adhesive
bond (B-10)
Fig.4-6-1
4-26
Focus Scale Plate
Focus Ring