Sony SAL24105 Service Manual page 18

Lens for dslr camera

Hide thumbs Also See for SAL24105:

Table of Contents

HELP05

Adhesive bond (LOCTITE 460)

Note:

Use the adhesive bond (LOCTITE 460) or the equivalent.

Do no use other adhesive bond such as the instantaneous glue that becomes whitish after dried.

Anti-diffusion agent (A-20): J-6082-611-A

Grease (G-85):

Apply the adhesive bond (LOCTITE 460) to the indicated portions of mount index and insert it in the specified hole of zoom hold

ring.

Apply the anti-diffusion agent (A-20) to the entire circumference of indicated portion of zoom hold ring.

Apply the grease (G-85) to the indicated portions (two locations) of zoom hold ring.

Screw Hole

Apply the grease (G-85)

Screw Hole

HELP06

Adhesive bond (B-40): J-6082-614-A

Apply the adhesive bond (B-40) to the tips of three screws and tighten them as shown in the figure.

Apply the adhesive bond (B-40)

SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)

J-6082-626-A

Apply the LOCTITE 460

Zoom Hold Ring

Screw Hole

Mount Index

Apply the anti-diffusion agent (A-20)

(Entire circumference)

Apply the adhesive bond (B-40)

HELP

Table of Contents