Sony SAL24105 Service Manual page 84

4-9-2. Zoom Brush Position Check (Zoom Adjustment Point)
Equipment
• Personal Computer
• Finished Inspection JIG (AC100 V only)
• Lens Adjustment Program (ActuatorChecker.exe)
1. Preparations
1) Connected to equipment with checking lens. (Refer to Section 4-1-3.)
2) Start up of "ActuatorChecker.exe".
[Set up]
3) Click
2. Checking Method
[Zoom Adjustment Point]
1) Click the
2) The Serial window appears. Input the lens serial number.
Note:
When
item.
Fig.4-9-10
3) The message "Move ZOOM to WIDE position. Then push [ENTER]." is displayed on the pop-up window.
Set the zoom to the wide position and press down the ENTER key.
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
, and perform the initial setting. (Refer to Section 4-1-4.)
.
Fig.4-9-9
[OK]
is clicked without inputting the serial number, the date executed is displayed on the completion window of each
Fig.4-9-11
4-33