Changing The Dishwashing Programme - Hanseatic HGU6082B14U7735ES User Manual

Page EN-24 Dishwasher operation
NOTICE
Risk of damage to property!
Improper handling of the appliance
may damage it.
■ Make sure that children and pets do
not stand on the open door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher, start
with the lower rack and then unload the
upper rack. This will prevent water drip-
ping onto the lower layer of dishes from
the top layer of dishes.
2. Leave the appliance door open slightly so
that the inside of the appliance can cool
off and dry.
If no further settings are made, the appliance
will automatically switch off/enter standby
mode after 15 minutes.
Changing the dishwashing
programme
CAUTION
Risk of scalding!
Hot steam emitted when opening the
appliance door can cause scalding.
■ Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■ Keep children and pets away from the
appliance when opening the door.
■ Make sure that children do not open
the door during operation.
(1)
(6)
You can interrupt an active dishwashing pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent dis-
penser (25) is already open.
1. Press the "Start/Pause"
order to interrupt the dishwashing pro-
gramme.
The remaining duration indicator (6) will
remain constantly illuminated.
2. If required, add extra dishwasher deter-
gent.
3. Press the button (13) as many times as
necessary until only the indicator (1) for the
desired programme goes out and the indi-
cator (6) for the remaining time is on "zero".
4. Select the new programme with the but-
ton (13).
5. Select additional options if required, as
described on the previous pages.
6. Start the programme.
(13) (11)
button (11) in