Test Run - Hanseatic HGU6082B14U7735ES User Manual

Regeneration process
°dH Setting
0–5 H1
6–11 H2
12–17 H3
18–22 H4
23–34 H5
35–55 H6
Example ECO programme: with a water
hardness level of H3 and under laboratory
conditions, the duration of the programme in-
creases by 4 minutes. The energy consump-
tion increases by 0.02 kWh and the water
consumption by 2.0 litres.

Test run

It is recommended that you carry out a test
run before the first dishwasher cycle in order
to remove residues from the manufacturing
process and in order to ensure that the appli-
ance functions perfectly.
If no water escapes during the test run and if
there are no unusual noises, the appliance is
ready to use.
• Carry out this test run when the dishwash-
er is empty and without any dishwasher
detergent. See chapter "Dishwasher op-
eration" from page EN-21 for the proce-
dure.
Installation, connection and initial commissioning
all X Programme
sequences
–
10
5
3
2
1
Page EN-39