Unloading The Dishwasher; Changing The Dishwashing Programme - Hanseatic HGVI6082D14J7713GS User Manual

Page EN-24 Dishwasher operation

Unloading the dishwasher

CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
■ Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■ Make sure that children do not open
the door if the programme has only
fi nished a short time ago.
■ Only open the door slightly to allow
the steam to escape more easily.
■ Allow the dishes to cool before un-
loading the dishwasher.
Tripping hazard!
An open dishwasher door can quickly
become a tripping hazard.
■ Close the door after every use.
■
Only leave the door slightly open to
cool down.
NOTICE
Risk of damage!
■ Make sure that children and pets do
not stand on the open door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher,
start with the lower rack and then unload
the upper rack. This will prevent water
dripping onto the lower layer of dishes
from the top layer of dishes.
2. Leave the dishwasher door slightly open
so that the inside of the dishwasher can
also cool off and dry out.
If no further settings are made, the appliance
will automatically switch off after 15 minutes.
Changing the dishwashing
programme
CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
■ Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■ Keep children and pets away from the
appliance when opening the door.
■ Make sure that children do not open
the door during operation.
You can interrupt an active dishwashing pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent com-
partment is already open.
1. Open the appliance door slightly.
The remaining duration display will stay
permanently illuminated.
2. If required, add extra dishwasher
detergent.
3. Switch the appliance off and on again us-
ing the (1) button.
4. Select the new programme with the
P button (5).
5. Select additional options if required, as
described on the previous pages.
6. Close the appliance door to start the
programme.