Set The Time Bands (C) And (D); Copy/Paste Time Bands; Setting The Season Change From The Calendar (Heating); Setting The Season Change From The Calendar (Cooling) - AERMEC PCO5 User Manual

5.5 SET THE TIME BANDS (C) AND (D)

NB: this mask is only visible if "BY CLOCK" is selected on the page "Se-
lecting the system operating mode";
This mask is used to set the times and action to assign to the time bands (c) and (d):
Plant
Timezone
Day
c 08:00 12:00
d 16:00 22:00
It is possible to assign up to four time bands (a, b, c, d) for each day of the week,
during which a specific action can be selected:
— ON: system on with setpoint 1 (nominal);
— SET2: system on with setpoint 2;
— OFF: system off;
NB: the system keeps the system off outside the time bands.

5.6 COPY/PASTE TIME BANDS

NB: this mask is only visible if "BY CLOCK" is selected on the page "Se-
lecting the system operating mode";
This mask is used to copy and paste the time bands set for a day of the week to
another (or to all other days):
Plant
Timezone
Day
Copy to
5.7 SETTING THE SEASON CHANGE FROM THE CALENDAR
(HEATING)
NB: this mask is only visible if "BY CALENDAR" is selected on the page
"Selecting the system operating mode";
This mask is used to set the start and end date for heating mode:
Cooling/Heating
Select Cool/Heat with
Calendar
Start Heating
Finish Heating
22
MONDAY
SEL
ON
ON
MONDAY
--- NO
0/---
0/---
5.8 SETTING THE SEASON CHANGE FROM THE CALENDAR
(COOLING)
NB: this mask is only visible if "BY CALENDAR" is selected on the page
"Selecting the system operating mode";
This mask is used to set the start and end date for cooling mode:
Cooling/Heating
Select Cool/Heat with
Outdoor temperature
Set ON cooling
Set ON heating
27.0°C
13.0°C