Unit Information Monitor; Sets The Interface Language - AERMEC PCO5 User Manual

Information
EVO n° 0
Firmware version:

8.37 UNIT INFORMATION MONITOR

This window contains information concerning the unit code, the software version
and the machine test date:
Information
Aermec S.p.A.
NRG0654°H°°°°°00
Code:
Ver.: 1.0.007 20/01/21
Testing date:
16:26 21/01/21

8.38 SETS THE INTERFACE LANGUAGE

This window is used to select the display language. Press "ENTER" to cycle the avail-
able languages:
Installer
Language: ENGLISH
Push ENTER for change
8.39 CONFIGURATION OF THE UNITS OF MEASURE
This window is used to set the units of measure to use in the system:
Options
Type of measurem.unit
STANDARD [°C/bar]
Supervisor BMS
STANDARD [°C/bar]
32
Type of units of measure: indicates the units of measure shown on the display; the
possible states are:
— STANDARD [°C/bar]
— ANGLO-SAXON [°F/psi]
BMS supervisor: indicates the units of measure read by the supervisor; the possible
states are:
---
— STANDARD [°C/bar]
— ANGLO-SAXON [°F/psi]
8.40 CONFIGURES THE INSTALLER MENU PASSWORD
This window is used to change the "Installer" menu access parameter:
Password
New password
Installer: 0000