Oceaneering C-Nav3050 Manual page 30

How to Connect a C-Nav3050 to the
C-NaviGator III
Please note:
Use the
pressing static without checking the fields match will result in whichever IP
address is in the input box being assigned.
To set the receiver to a static IP, change the Mode to "Manual" and press Apply.
To set the C-NaviGator to use a static IP, browse to the menu at:
Menu / Settings / System Network Settings
Change Config. Type to "Static." And then press Apply.
Revision 3
button if the input box IP does not match the IP in black text,
Page 30 of 31 4/13/2017