Oceaneering C-Nav3050 Manual page 22

How to Connect a C-Nav3050 to the
C-NaviGator III
In this configuration we will first start with an automatically assigned IP address
®
for the C-Nav3050
Please note:
If the C-Nav3050® has previously been configured with a static IP address in
manual mode it may be required to cycle the power on the receiver for it isn't
assigned an automatic IP address by the network.
5. Please press query to check to see if the receiver has been assigned
an IP address automatically via DHCP.
In the case of the office network the receiver has been assigned an IP address of
10.6.1.205.
Revision 3
GNSS receiver by utilizing DHCP mode.
Page 22 of 31 4/13/2017