Oceaneering C-Nav3050 Manual page 13

How to Connect a C-Nav3050 to the
C-NaviGator III
The receiver is now ready to make the connection via USB, Plug the USB cable
into an available USB port. With the latest C-NaviGator III software the USB
connection will be established automatically.
This can be confirmed at:
Menu / Settings / Serial Ports.
You will find an additional item in the Ports list detailing 3050:XXXXX where the
X's would represent the receivers serial number.
You should now be able to switch to the connection via the
button.
Revision 3 Page 13 of 31 4/13/2017