ISG-2400 Wireless Gateway
Place (or mount if desired) the ISG-2400 Gateway within
USB cable range of the central workstation computer.
NOTE: The ISG-2400 Gateway router MUST be located
indoors and away from outside exposure.
To Install the Gateway:
Connect antenna cable to the XBee Antenna
Connector jack on the ISG-2400 Gateway.
Connect the USB cable to the Gateway and an open
USB port on the workstation computer, preferably
on the back of the computer to prevent accidental
removal.
USB Cable
Figure 14 - ISG-2400 Gateway Router Installation
Confi guration
The procedures for confi guring and operating the Wireless
Network for the Integrated Sensor System (ISS) can be
found in the Rain Bird Soil Manager Software User's Guide.
Antenna
Cable
Integrated Sensor System
83