Set Sample Rate - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

The Temperature Units screen
appears. Press the UP or DOWN
button to select Degrees C or
Degrees F; then press OK.
When fi nished, turn the dial
to Auto (SENSOR or BASIC)

Set Sample Rate

The sample rate determines how
often the sensors measure soil
conditions.
NOTE: The sample rate will
need to be manually set if
the radio is off or network
communication is lost.
Turn the dial to
CONFIGURE DATA LOGGER
The Confi gure screen appears.
Press the UP or DOWN button to
select Sample Rate; then press
OK.
The Set Sample interval screen
appears with minutes selected.
Press the + or buttons to set
the desired sample period; then
press DONE.
When fi nished, turn the dial
to Auto (SENSOR or BASIC)
Integrated Sensor System 15