Remove Sensor - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

Remove Sensor

The ISDL-2400 removes the address of
a selected sensor from the Data Logger
database and the removed address is
made available to new sensors.
NOTE: A sensor should remain
connected to the ISDL when
removing an address. The sensor
can be disconnected when
Remove Sensor is complete.
Turn the dial to
SENSOR SETUP
The Sensor Setup screen appears.
Press the UP or DOWN button to
select Remove; then press OK.
20 Integrated Sensor System
The Remove Sensor screen
appears with a list (channel and
slot) of every currently installed
sensor. Press the UP or DOWN
button to select desired sensor/
slot to remove; then press OK.
When completed, the "Sensor
Removed" message is displayed.
When fi nished, turn the dial
to Auto (SENSOR or BASIC)