Network Hardware Installation; Antenna; Figure 13 - Antenna Installation - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

Network Hardware Installation

This section provides the procedures to install the wireless
network hardware.

Antenna

Determine an installation site for the antenna to allow
maximum wireless network reception. This can be on the
roof the building where the central workstation is located,
or else another appropriate location.
To Install the Antenna:
Install the antenna according to the manufacturer's
instructions.
Run the antenna cable from the antenna to the
location of the ISG-2400 Wireless Gateway router.
82 Integrated Sensor System
Antenna
Surge
Antenna
Arrestor
Cable
Ground Wire

Figure 13 - Antenna Installation