Wireless Network Range Test; Items Required; Conduct Range Test - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

Wireless Network Range
Test
This procedure is used to verify the
proposed locations of the system
components on the Site Survey.
The range tests confi rm all units
will be within wireless range before
installation.

Items Required

The Site Survey map
Two ISR-2400 Wireless Repeaters
A handheld GPS locator
(optional)
Handheld radios or cell phones
for communication between testers
Conduct range tests in between
every proposed unit location on
the Site Survey for each ISDL-2400
and ISR-2400 pair, and also for each
ISR-2400-ISR-2400 pair. Verify at least
two ISR-2400's are within range of
the base radio antenna. Use the Site
66 Integrated Sensor System
Survey map and the GPS locator to
pinpoint proposed unit locations. The
locations can be adjusted based on
the range tests for effi cient system
operation.
NOTE: Two ISR-2400 Repeaters
must be used to verify every
proposed location. It is
important that the height of the
repeaters while conducting the
test matches the height of the
units when installed.

Conduct Range Test

Power on ISR #1 at the fi rst
proposed location, 5 feet above
ground.
On the Home screen, press the
MENU button.
Home
09/23/2010 03:28:45
Vbat:HIGH Link:
Last SYNC:
Radio Status: Awake
MENU WAKE
The Menu screen appears. Press
the UP or DOWN button to
select Range Test; press OK.