System Reset
This position performs a system
reset or returns all settings to the
default factory values.
28
Integrated Sensor System
Reset
This function resets the
microprocessor without aff ecting
system settings (such as date, time,
or sampling rate) or sensor channel
addresses.
Factory Defaults
This function resets all system
settings (except date and time) to
default factory values.
NOTE: After the Factory Default
function is performed, all
sensors are un-installed from
the data logger. Each connected
sensor keeps its last assigned
address, but "no sensors
installed" would be displayed on
the Auto Sensor, Auto Basic and
Manual Sensor screens. Use the
Scan Sensors function from the
Sensor Setup menu to reinstall
every sensor.
Reset
This function will not change system
settings or sensor addresses.
Turn the dial to
SYSTEM RESET
The System Reset screen
appears. Press the UP or DOWN
button to select Reset; then
press OK.