Upgrade Firmware - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

Upgrade Firmware

The ISR-2400 fi rmware can be
updated using a standard SD card.
NOTE: To begin fi rmware
upgrade, insert an SD card
with the new fi rmware. SD card
Replacement procedures can be
found in the Appendix section,
page 87.
On the Home screen, press the
MENU button.
Home
09/23/2010 03:28:45
Vbat:HIGH Link:HIGH
Last SYNC: 01:39:35
Radio Status: Awake
MENU WAKE
46 Integrated Sensor System
The Menu screen appears. Press
the UP or DOWN button to
select Confi guration; then press
OK.
The Confi gure screen appears.
Press the UP or DOWN button to
select Upgrade Firmware; then
press OK.
The Update Firmware screen
appears. The "Confi rm fi rmware
update... " message is displayed.
Press the 2 and 4 buttons for 3
seconds to initiate upgrade.
The Update Firmware screen
displays "Checking SD card..."