Upgrade Firmware - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

Upgrade Firmware

The ISDL-2400 fi rmware can be
updated using a standard SD card.
NOTE: To begin fi rmware
update, insert an SD card with
the new fi rmware. SD card
replacement procedures can be
found in the Appendix section,
page 87.
Turn the dial to
CONFIGURE DATA LOGGER
The Confi gure screen appears.
Press the UP or DOWN button
to select Update Firmware; then
press OK.
16 Integrated Sensor System
The Update Firmware screen
appears. The "Confi rm fi rmware
update... " message is displayed.
Press the 2 and 4 buttons
together for 3 seconds to initiate
the update.
The Update Firmware message
displays "Checking SD card..."
NOTE: If the SD card cannot be
read, "Firmware update fi le not
found" is displayed.
When the update is found, the
Rain Bird Bootloader screen
is displayed. An updating
fi rmware status bar indicates
the update progress.
Rain Bird
ISDL-2400
Bootloader 1.02
DO NOT POWER OFF
Updating firmware
NOTE: Do not change the dial
position or turn off power to
the ISDL-2400 when updating
fi rmware.