Sensor Scan (Detect) - Rain Bird ISDL-2400 Installation, Programming & Operation Manual

Sensor Scan (Detect)

The channel and address of all
connected sensors are detected and
displayed.
Turn the dial to
SENSOR SETUP
The Sensor Setup screen
appears. Press the UP or DOWN
button to select Scan Sensors;
then press OK.
22 Integrated Sensor System
The Sensor Scan screen appears
and begins scanning.
When complete, the number
of installed sensors and the
assigned channel/slot for each
detected sensor is displayed.
Press RETRY to run the Scan
again if desired.
When fi nished, turn the dial
to Auto (SENSOR or BASIC)