Potential values for RSSI (Received Signal Strength Indicator)
and RX/TX (received packets/transmitted packets) are
shown in the following tables.
NOTE: Acceptable values are an RSSI signal higher
than -85 dBm and an RX/TX value above 90%.
Table 3 - RSSI Values
RSSI Value (dBm) Relative Strength
-92 to -85
Low
-85 to -80
Medium
Above -80
High
Table 4 - Packet Ratio
RX/TX Value (%)
90-100
Yes
0-90
No
Acceptable
NOTE: The RX/TX value is displayed on the LCD as
a ratio of packets received to packets transmitted.
For example, if 10/10 is displayed, then 10 packets
were received out of 10 packets transmitted for a
percentage of 100%. If 5/10 is displayed, then only 5
packets were received out of 10 packets transmitted
for a percentage of 50%.
Integrated Sensor System
69