Table of Contents
Advertisement
INSTALLATION
Remove Unit From Skid
•
Position the unit near a suitable electrical outlet.
•
Caution: case must always remain supported or
center of gravity imbalance will cause case to fall.
•
Slide unit to rear of skid and tip backward off skid.
Position and Level Units
For your safety, equipment is furnished with a
properly grounded cord connector. Do not at-
tempt to defeat the grounded connector.
Lift unit with suitable prying bar and blocking. Note
the point of lifting to minimize damage to case. Ro-
tate leveler to obtain proper height to stabilize and
level the unit.
Level Units with
7/16 Wrench
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Addenda CSF3931 and is the answer not in the manual?