PROAIM Cinema Series Assembly Manual

Suction mount car camera rigging system

Hide thumbs Also See for Cinema Series:

Download this manual

Action-King 8" Suction Mount Car Camera

Rigging System

(CM-ACKG-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

2 x Washer

5 x 360° Rotating Speed Rail Clamp

2x 8''Suction Cup

Bolt and 5mm Allen Key

3 x 6'' pipe with 42mm OD

2x Safety Straps

Flight Case

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Page 1 Action-King 8” Suction Mount Car Camera Rigging System (CM-ACKG-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2  Press the hidden button on the bumper panel in the front of the vehicle, and remove it, as shown in the image.  Insert a toe hook (Not included) into the hidden panel and tighten it correctly. Note: The toe hook's purpose is to help you set up your setup easily.
Page 3  Insert the rod (Not Included) into the other end of the speed rail clamp and tighten it cor- rectly with the help of a 5mm Allen key. Suction Cup Setup To guarantee proper adhesion of suction cups, check that the cup surfaces & mounting surface is clean, dry &...
Page 4  Your setup is ready to use. Note: Test all fixtures before driving . YOUR PROAIM ACTION-KING 8” SUCTION MOUNT CAR CAMERA RIGGING SYSTEM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.

Action-king cm-ackg-01