Page 1
Airwave V1060 Shock Absorber Arm Set, 22-132lb (VI-ARWV-1060) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2
Airwave V1060 Setup Loosen and open both the clamps of the Airwave V1060. Align the clamps of the Airwave to a Scaffold Pole and then secure the clamp by properly tightening the clamp knob. NOTE: Airwave V1060 Arm can be securely attached to a Dia 42mm-50mm Scaffold Pole or Speed Rail with a quick-lock Scaff Mechanism.
Page 3
Attach the air pressure pump with the washer fitted to the air suspension shocker. After attaching the washer of the air shocker to the air filling pump, pump the air using the latter. NOTE: Features a high pressure shocker pump that quickly sets pressure according to the weight of your camera;...
Page 4
In order to secure the gimbal (Not Included) with the Mitchell castle nut with ronin mount clamp, lock the assembly with the provided lock lever. Push the pin of the gimbal plate to detach it from the gimbal (Not Included), and then attach it to your camera...
Page 5
You can manually loosen or tighten the shock absorbing spring according to the weight capacity of the setup. Desire Configuration Mount your Airwave1016 Mount over-slung or Under-slung Under-slung/over-slung Setup Loosen and remove the bolt of the Airwave V1060 using the Allen key. ...
Page 6
Loosen and remove both the bolts at the bottom of the Airwave V1060. Now, Mitchell platform has been detached from the Airwave V1060. Insert and attach the Mitchell platform into the Airwave V1060 by sliding it in an over- slung manner.
Page 7
Airwave V1060 over-slung setup is ready to use. YOUR PROAIM AIRWAVE V1060 SHOCK ABSORBER ARM SET, 22-132LB ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.