PROAIM Cinema Series Assembly Manual page 2


Press the hidden button on the bumper panel
in the front of the vehicle, and remove it, as
shown in the image.

Insert a toe hook
hidden panel and tighten it correctly.
Note: The toe hook's purpose is to help you
set up your setup easily.
6'' pipe with 360° Rail Clamp Setup

Loosen and remove the washer from the 6''
pipe quickly with the help of a 5mm Allen key.

Now, place one washer on the top of the toe
hook such that their holes align with each
other. Screw in the other washer from the
bottom.

Insert the washer screw into the 6" pipe, then
tighten them properly with the help of a 5mm
Allen key.

Now, loosen the 360° rotating speed rail
clamp and attach one end to the 6" pipe.
(Not included) into the
2