Page 1
Mitchell Vibration Isolator for Gimbals (VB-MTCL-00) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Mitchell Plate Rods Middle Base Plate...
Page 2
Mitchell Isolator Setup Attach Mitchell Vibration Isolator with plate of your setup and tighten to secure it properly. NOTE: The isolator plate can be fixed both Over Slung Under Slung, your requirement. Then loosen the bolts of Mitchell plate and insert Castle Ring into it.
Page 3
Then attach Middle Base Plate with Ronin Plate (Not Included). Insert the bolts and tighten them with help of allen key. Now attach this Middle Base Plate with Isolator Plate tighten bolts accurately with allen key, as shown in image. ...
Page 4
Now adjust other wire set in center of the Vibration Isolator and tighten all allen bolts to secure spring set appropriately YOUR PROAIM MITCHELL VIBRATION ISOLATOR FOR GIMBALS ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.