PROAIM Cinema Series Assembly Manual page 3


Insert the rod (Not Included)
end of the speed rail clamp and tighten it cor-
rectly with the help of a 5mm Allen key.
Suction Cup Setup
To guarantee proper adhesion of suction cups, check that the cup surfaces & mounting surface is clean,
dry & dust-free. Please mount it on smooth, even & non-porous surfaces.

Place your suction cup in the selected position
on the car surface. Next, press the suction
pump to create a vacuum between the suc-
tion cup and the car surface. Finally, release
the pump to mount the suction cup properly.

Insert the 6" pipe on the suction cup into one
end of the 360° rotating speed rail clamp.
Then, insert a rod (Not included)
er end of the clamp.

After inserting the rod, tighten the clamp
properly with the help of a 5mm Allen key.

Although the suction cup holding force is
adequate for regular driving shots, you must
use safety belts/tension straps for additional
security. When mounted on cars, properly
secure the objects attached to the suction cup
(e.g. camera, gimbal, etc.). Use rubber sleeves
to avoid dents and scratches on car paint.
Tighten safety straps carefully to prevent
damages.
into the other
into the oth-
3