Sfp Transceivers - Siemens RUGGEDCOM RSG908C Installation Manual

Chapter 4
Communication Ports
Port Types
Figure 19: LC Port
1. Tx Connector 2. Rx Connector
LEDs
Each port features an LED that indicates the link/activity state of the port.
Green (Solid)
Green (Blinking)
Off
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
Section 4.2

SFP Transceivers

The RUGGEDCOM RSG908C supports up to two Small Form-Factor Pluggable (SFP) transceiver sockets, which are
compatible with a wide array of SFP transceivers available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Green (Solid)
Green (Blinking)
Off
Compatible SFP Transceivers
The following SFP transceivers are compatible with the RUGGEDCOM RSG908C. For more information, including
installation/removal instructions and ordering information, refer to the
[https://support.industry.siemens.com/cs/ww/en/view/109482309].
22
1
State
State
2
Description
Link established
Link activity
No link detected
Section 5.4, "Fiber Optic Ethernet Port
Description
Link established
Activity
No link detected
RUGGEDCOM SFP Transceiver Catalog
RUGGEDCOM RSG908C
Installation Guide
SFP Transceivers